• Optional F316/F304 Austenitic Stainless Steel Construction:The valve body is available in ASTM A182 F316 (0Cr17Ni12Mo2, molybdenum‑bearing for chloride corrosion resistance) or F304 (0Cr18Ni9, economical general‑purpose corrosion resistance), covering full operating conditions from general corrosion to extreme sour and chloride‑containing services.

• Solid Forged Three‑Piece Structure:The main body and side end caps are all fully machined from forgings with a dense grain structure and free of casting defects. The symmetrical three‑piece design ensures uniform stress distribution and allows convenient in‑line disassembly and maintenance without removing the entire valve from the pipeline.

• Trunnion‑Mounted Ball Design:The ball is precisely supported by upper and lower trunnions, achieving sealing independent of medium pressure. Operating torque is low and consistent, completely eliminating ball deformation and sealing failure risks under 2500LB ultra‑high pressure.

• Dual‑Seat Ultra‑High Pressure Sealing:Bi‑directional reliable sealing is achieved using metal seal with flexible graphite or PEEK composite seats. Double Piston Effect (DPE) or Double Isolation and Bleed (DIB‑1/DIB‑2) structures are optional to meet the most stringent isolation requirements.

• RTJ Ring‑Type Joint Flange:The valve is equipped with ASME B16.5 RTJ (Ring‑Type Joint) flanges. When paired with metal ring gaskets (octagonal / oval type), it provides absolutely reliable sealing under 2500LB ultra‑high pressure, with excellent resistance to thermal cycling and vibration.

• Fire‑Safe Design:Compliant with API 6FA. In the event of soft seal burnout, the metal ball and metal seat come into direct contact to form a metal‑to‑metal seal, effectively blocking media flow even under ultra‑high pressure fire conditions.

J-VALVES trunnion mounted ball valves standard seat ringsare soft-seated by the use of athermoplastic or elastomeric or Meta

Seats-Tungsten /Chrome carbide /ENP

Single Piston (SPE) , Double Piston effect (DPE) and Combination (SPE x DPE) seats are available.

Seat Princlple

Two independent seat rings grant the sealing, barrieragainst the line pressure actingon the upstream and downstreamsides of the valve which allows the valve tobe bidirectional.

A set ofcoil springs acting, between the upstream side ofeach seatring,andthe body,generate an uniform thrust on theseat which push the same against the ball and grant the sealingfeature with no orverylow pressureinthe line,when the line pressure increasethe thrust actingon theseat increases proportionally and the sealing leatureis granted throughout the fullpressure range.

The J-VALVES SPE trunnion mounted ball valves are available with Double

Block & Bleed in dependent oftheseat type.

Valve seating variations

Single Piston Effect

Single piston effect (SPE) is the stand ard feature for theseat rings of the J-VALVES SPE trunnion mounted ball valves.

On a SPE seat ring:

The pressure ac tingon the upstream side ofthe seat ringgenerates aforce which push theseattowards the ball.The pressure actingon the downstream side ofthe seatring generates a force which pull theseatring away fromthe ball.

Anyoverpressure which may be generated by the thermal expansion of the fluid trapped in thebodycavity with the ballin fully closed position, will beautomatically dischargedinthe line on the lower pressure side.

Double Piston Effect

Double piston effect(DPE) is a stand ard feature fortheseat rings ofthe J-VALVES trunnion mounted ball valves & recommended forwelded body valves. Ona DPE seat ring, both the pressure acting on the upstream sideof theseatring andthe pressure acting on thedownstreamside of the  seatring, generatea forcewhich push the seattowards the ball.

With th is type ofseat ring,the eventual over press ure whichmay be generated by the thermal expansion ofthe fluidtrappedinthebodyeavitywith theball in fullyclosed position,can be discharged by the use of:

An external safetyrelief device.

The Double Piston Effect grants a double sealingfeature,iftheupstreamseat ringisdamaged, thedown stream seatgrant the sealingfeature of the valve.