• Integral Forged Steel & Fully Welded Structure:The valve body is constructed by fully welding forged pipe sections and forged end parts, without any body flanges or bolted connections. This completely eliminates external leakage risks of the valve, and the maintenance-free design delivers a service life of more than 50 years.
• Multiple Forged Steel Material Options:The valve body is available in ASTM A105 (carbon steel), A350 LF2 (low-temperature steel), A694 F52/F65 (high-strength line pipe steel), etc., covering full requirements from ambient to low-temperature service, and from general-strength to high-strength pipeline applications.
• Fixed Ball / Trunnion Supported Design:The ball is precisely supported and fixed by upper and lower trunnions, achieving sealing independent of medium pressure. The operating torque is low and consistent, ensuring flexible opening and closing even in high-pressure, large-size applications, and guaranteeing long-term sealing reliability.
• Double Piston Effect (DPE) Seat:Bi-directional sealing design. In the event of abnormal pressure buildup in the body cavity, the seats automatically tighten against the ball to prevent overpressure, supporting DBB (Double Block & Bleed) function.
• Full Bore Design:The flow passage diameter is fully consistent with the pipeline inner diameter, resulting in nearly zero pressure drop. It allows unobstructed passage of pigs and intelligent pipeline inspection gauges, reducing pipeline maintenance costs.
• Suitable for Buried or Subsea Installation:The fully welded structure has no external leakage points, enabling direct buried or subsea installation without valve pits or waterproof seals, greatly reducing civil engineering costs.

J-VALVES trunnion mounted ball valves standard seat ringsare soft-seated by the use of athermoplastic or elastomeric or Meta

Seats-Tungsten /Chrome carbide /ENP

Single Piston (SPE) , Double Piston effect (DPE) and Combination (SPE x DPE) seats are available.

Seat Princlple

Two independent seat rings grant the sealing, barrieragainst the line pressure actingon the upstream and downstreamsides of the valve which allows the valve tobe bidirectional.

A set ofcoil springs acting, between the upstream side ofeach seatring,andthe body,generate an uniform thrust on theseat which push the same against the ball and grant the sealingfeature with no orverylow pressureinthe line,when the line pressure increasethe thrust actingon theseat increases proportionally and the sealing leatureis granted throughout the fullpressure range.

The J-VALVES SPE trunnion mounted ball valves are available with Double

Block & Bleed in dependent oftheseat type.

Valve seating variations

Single Piston Effect

Single piston effect (SPE) is the stand ard feature for theseat rings of the J-VALVES SPE trunnion mounted ball valves.

On a SPE seat ring:

The pressure ac tingon the upstream side ofthe seat ringgenerates aforce which push theseattowards the ball.The pressure actingon the downstream side ofthe seatring generates a force which pull theseatring away fromthe ball.

Anyoverpressure which may be generated by the thermal expansion of the fluid trapped in thebodycavity with the ballin fully closed position, will beautomatically dischargedinthe line on the lower pressure side.

Double Piston Effect

Double piston effect(DPE) is a stand ard feature fortheseat rings ofthe J-VALVES trunnion mounted ball valves & recommended forwelded body valves. Ona DPE seat ring, both the pressure acting on the upstream sideof theseatring andthe pressure acting on thedownstreamside of the  seatring, generatea forcewhich push the seattowards the ball.

With th is type ofseat ring,the eventual over press ure whichmay be generated by the thermal expansion ofthe fluidtrappedinthebodyeavitywith theball in fullyclosed position,can be discharged by the use of:

An external safetyrelief device.

The Double Piston Effect grants a double sealingfeature,iftheupstreamseat ringisdamaged, thedown stream seatgrant the sealingfeature of the valve.